Skip to Content

If not an Ibis, then what is it?

Thumbnail : If not an Ibis, then what is it?

Just purchased this from Ebay, and do not think it is an Ibis. Not really worried about that because I bought it because of the apparent quality of the construction. The problem is that now I do not know what type of bike it is, and the mystery …

What’s the story behind this Trek-branded full Ti Lemond frame?

I was browsing Craigslist and lo and behold I stumble upon an interesting story from the not too distant past –

After the Lemond/Trek fallout, the story goes, decals and head badges ran out, these last, full Titanium Lemond Victoire frames with traditional geometry (called “Classic” after the sloping top …

WITTSON Custom Fixie 004

Thumbnail : WITTSON Custom Fixie 004

– custom fixie geometry – custom slight tubing – integrated CAMPAGNOLO seatpost clamp – straight with bullet endings seatstays – made in USA PARAGON dropouts – left dropout with bottle opener – hand brushed finish – custom graphics – custom sandblasting

Size: 55cm Weight: 1380g

help identifying a Ti frame?

Hey, all. Recently, I picked up an unknown Ti frame. The price and quality were good enough that I bought it without ascertaining the make of the frame. Here’s some pictures of it:

From talking to some folks online, I gather the quality is pretty good, and …

Interview with Wittson Cycles’s Vidmantas Zukauskas

How did your passion for cycling start? In the beginning of the 70s, for me, being a kid from a small village, a sports bicycle (nowadays known as a road racing bicycle) was an unreachable dream. Our family couldn’t afford one so I went to a Cycling Sport School just to …

WITTSON Custom CX 001

Thumbnail : WITTSON Custom CX 001

– cyclocross disc frame – oversized headtube for conical 1.5″ fork – integrated seatpost with an support on toptube/seatsatays cross section – ti seatmast – integrated disc cable routing – integrated shifting cable routing – PressFit BB86 – bullet chainstays – PARAGON low mount dropouts – ti bolts

Frame: Custom (grade 9 ti) Fork: ENVE Cross Disc 1.5″ Tapered (carbon)

Cranks: ROTOR …

MOOTS frames serial number years

Thumbnail : MOOTS frames serial number years

As a fan of ti frames one is naturally a fan of MOOTS based in Steamboat Springs, Colorado.  Moots may be the most revered of all titanium makers, and therefore there is a very strong second-hand market for Moots frames.  All Moots frames should have a serial number stamped on …

4T Custom Fixie

Thumbnail : 4T Custom Fixie

Hi TiRides Fans,

This is our latest custom ti build made by me and my father ( for a domestic cycling show. I hope you enjoy it same as we do 🙂

We have built it in classic geometry with slim grade 9 ti tubes to look it …

On-One Inbred ti 456

Thumbnail : On-One Inbred ti 456

Frame: On One Inbred Titanium 456 (size 16″)

Stem: ControlTech Ti Mania (31.8 / 100mm)

Handlebar: Litespeed Ti OS flatbar (31.8 / 600mm)

Handlegrip: Brooks Leather Slender Grips (130mm)

Headset: Chris King Ti No Threadset (1 1/8)

Headset Spacers: ATik Ti (10mm) & ControlTechX2 (15mm each)

Shifters: Shimano Deore XT SL-M770

Brake levers: Shimano Deore XT BL-M775

Fork: …

4T Custom Race

Thumbnail : 4T Custom Race

Our latest custom built frame for a Australian customer:

– custom geometry – custom painting – integrated seattube – Colnago C50 carbon tubes – Colnago C50 seat and chainstays – cnc’ed dropouts

Page : 2 / 15 ‹ First 1 2 3 4 5 6 7 Last ›