Skip to Content

Archive for the ‘S-U’ Category

S-U sub categories : Salsa, Sampson, Serotta, Seven, Spats, Strong Frames, Sycip, Teledyne and Titus

Spats 69er

Thumbnail : Spats 69er

The Spats 69er features integrated drop outs with adjustable drop outs, BB30 and a head tube that is 1.5inch to 1.8th. The bike can run all three options Single speed chain; single speed gates belt drive and derailleur.

Titus FCR 26″ ti mountain bike from East Java indonesia

Thumbnail : Titus FCR 26″ ti mountain bike from East Java indonesia

size M, good quality, likes, spesification, grip odi ^pedal welgo ^botle cage salsa Ti” ^Qr red hope ^ban maxxis maxxlite 310 ^stem thomson elite x4 10cm ^seatpost Thomson elite ^headset canne creek ^handlebar Noir worldcup carbon>> up date ; k force lite fsa carbon ^sadel selle italia flite titanium rail ^fork fox 10cm Rebound&lock air […]

Serotta CHT Ti hardail, 20″

Thumbnail : Serotta CHT Ti hardail, 20″

The CHT was Serotta’s premium hardtail model, featuring aggressively shaped, cold-worked, and butted 3/2.5 titanium.  “CHT” means Competition Hardtail, by the way.  The CHT employs Serotta’s  premium level C4Ti tube set.  Serotta finished this frameset with a gorgeous pearl green color and brushed-finish rear stays. The frame is designed to run a rear V-brake. The […]

Seven Alaris Race titanium road frame

Thumbnail : Seven Alaris Race titanium road frame

Seven Cycles’ Alaris Race 3/2.5 titanium road frame was offered between 2004 (?) and 2009.  Seven has three grades of 3/2.5 titanium tubesets: Integrity – no butting of tubes Argen – some butting (double butted) Cirrus – “ultra” butting The Alaris Race uses the Integrity tubeset, which implies a frame that will be a bit […]

Salsa Cycles titanium El Mariachi MTB frame

Thumbnail : Salsa Cycles titanium El Mariachi MTB frame

The Salsa El Mariachi hardtail 29er was introduced in 2007. The standard El Mariachi was produced from Salsa’s “Kung Fu” CroMoly tubing. To produce the El Mariachi in titanium, Salsa turned to the titanium-fabrication expertise of Lynskey. So, the titanium version of the El Mariachi is manufactured in the U.S.A. by Lynskey Performance Designs. You […]

Spats Catapult (road) and Hydra (MTB) frames

Thumbnail : Spats Catapult (road) and Hydra (MTB) frames

Spats was formed in 2009, focusing exclusively on titanium frames. As was written spats.com.au: Spats is a local Australian Company based in Canberra, ACT. Spats was established in 2004 by John Musladin with a dream of building an all Australian Bike, John built a team of passionate, enthusiasts pulling together a multi-discipline approach. Spats had […]

Sycip Super Unleaded MTB frame

Thumbnail : Sycip Super Unleaded MTB frame

Sycip has a range of frames in aluminum and steel, and then there’s the Sycip 3/2.5 titanium Super Unleaded.  The frame is available in both 26″ and 29er versions.  Sycip has stock sizes but also offers custom sizing/geometry for a $300 up charge. Sycip is based out of California.  For more information, check out the […]

Sampson Silverton titanium road frame

Thumbnail : Sampson Silverton titanium road frame

Eric Sampson began designing bikes in 1992 and sells them under the Sampson Sports label. The Silverton was the top of the line titanium road model from the early 2000’s, made by TiSports / Sandvik in the state of Washington from straight-gauge 3/2.5 titanium. One of the most special qualities of the Silverton is that […]

Titus Cycles liquidating assets, purchased by PlanetX

Titus Cycles has been purchased by Planet X, a European retailer with a direct-to-consumer business model. Titus Cycles announced on November 4th that they were liquidating the company after being unable to restructure their business. It’s sad to see Titus go. They made some really nice frames, including the FCR (Full Custom Racer) models.

Titus FCR mountain frame

Thumbnail : Titus FCR mountain frame

Titus Cycles, based out of Tempe AZ, made an FCR (Full Custom Racer) titanium frame for road, mountain, and cyclocross. The pictures below showcase an FCR 26″ mtb frame. Titus describes their FCR series: The Titus Full Custom Racer features oversized and ovalized, asymetrical chainstays for superior bottom bracket stiffness and maximum tire clearance, Large […]

Page : 1 / 2 1 2 Last ›